| Characteristic |
Circular wear tube
Tolerances based on the requirements of EN 10219 |
| Outside diameter (D) |
±1%, with a minimum of ±0.5 mm and a maximum of ±10 mm |
| Out-of-roundness |
2%, when D/T ≤ 100 |
| Thickness (T) |
±10% when T ≤ 5 mm and ±0.5 mm when T > 5 mm |
| Straightness |
0.20% of total length and 3 mm over any 1 m length |
| Mass per unit length |
Individual tube: ±6% |
| Standard length |
≥ 6000 mm: 0/+50 mm |
| Exact length |
Agreed at the time of enquiry and order |
All external dimensions are measured with a minimum distance from the end of the section. The distance must be a minimum of 100 mm.